 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SF1126A * * * * * Designed for Interactive Video Applications Wide Bandwidth and Excellent GD Variation 9.1 x 7.1 mm Surface-mount Case Single Ended Input and Output Complies with Directive 2002/95/EC (RoHS) Pb Value +10 30 -40 to +85 260C for 30 s Units dBm VDC C 127 MHz SAW Filter Absolute Maximum Ratings Rating Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Suitable for lead-free soldering - Max. Soldering Profile SM9171-10 Electrical Characteristics Characteristic Nominal Center Frequency Passband Insertion Loss at fc 1.3 db Passband Group Delay Variation over fc fc12.0 MHz Phase Linearity over fc12.0 MHz Rejection < 107.0 MHz > 147.25 MHz Ultimate Operating Temperature Range Frequency Temperature Coefficient TA FTC 1 +25 -94 1, 2, 3 40 40 40 +30 C ppm/C dB Sym fC IL BW1.3 GDV 1, 2 15.0 11 30 10 Notes 1 Min Typ 127.000 14 Max 15.0 Units MHz dB MHz nsP-P P-P Impedance Matching to 50 Unbalanced Case Style Lid Symbolization (YY = year, WW = week) External L-C SM9171-10 9.1 x 7.1 mm Nominal Footprint RFM SF1126A YYWW Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. Part to part absolute delay measurement records the absolute delay mean across 1 dB passband. 5. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 6. The design, manufacturing process, and specifications of this filter are subject to change. 7. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 8. US and international patents may apply. 9. Electrostatic Sensitive Device. Observe precautions for handling. Electrical Connections Connection Port 1 Hot (Input) Port 1 Gnd Return Port 2 Hot (Output) Port 2 Gnd Return Case Ground Terminals 1 10 6 5 All others RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1126A-121604 Page 1 of 2 127.0 MHz SAW Filter SM9171-10 Case 10-Terminal Ceramic Surface-Mount Case 9.1 x 7.1 mm Nominal Footprint Case Dimensions Dimension A B C D E H P Min 8.86 6.88 mm Nom 9.09 7.11 1.91 0.99 0.79 1.0 2.54 Max 9.40 7.40 2.00 Min 0.349 0.271 Inches Nom 0.358 0.280 0.075 0.039 0.031 0.039 0.100 Max 0.370 0.291 0.079 Materials Solder Pad Termination Lid Body Pb Free Electrical Connections Connection Port 1 Port 2 Input or Return Return or Input Output or Return Return or Output Ground Single Ended Operation Differential Operation Terminals 6 5 1 10 All others Return is ground Return is hot Au plating 30 - 60 inches (76.2-152 m) over 80200 inches (203-508 m) Ni. Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 inches Thick Al2O3 Ceramic B 3 2 C H 2 P 3 4 1 1 4 5 10 A E (10 Places) 10 5 6 9 9 6 (10 Places) D 7 8 8 7 RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1126A-121604 Page 2 of 2 |
Price & Availability of SF1126A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |